Velux TGR 010 0000 Guida di Installazione

VAS 451636-2013-0914°-60°15°-90°ENGLISH: Installation instructions for rigid sun tunnel TGR/TMRESPAÑOL: Instrucciones de instalación para túnel solar

10 VELUX1112¾" 19 mmENGLISH: Attach the upper elbow to the top collar. Tape and secure joints with tunnel clips and screws provided.ESPAÑOL: Su

VELUX 1113ENGLISH: Adjust the angle of both elbows so that they point directly against each other A, B. Elbows can be damaged if excess force is app

12 VELUX1415ZTRENGLISH: Assemble the rigid tunnel section with clips provided.Note: For longer sun tunnels, use VELUX rigid tunnel sections type ZTR

VELUX 13ENGLISH: Cut the rigid tunnel section to length A. Reduce the length of the tunnel section by increasing overlaps. Secure all joints with tw

14 VELUXENGLISH: Tape all joints. Note: For rigid sun tunnel assemblies, it is generally recommended to secure transmittance of loads to the roofing

VELUX 15ENGLISH: Align holes; install and secure the dome with the ¾" (19 mm) screws provided. Do not overtighten the screws.Note: If installi

16 VELUX24ENGLISH: Install the trim ring by aligning notches and rotate to secure. ESPAÑOL: Instale el anillo de terminación alineando las ranuras

VELUX 17ENGLISH: ZTL: sun tunnel light option – Refer to light kit ZTL 114 for sun tunnel sizes 010 and 014. ZTA: Optional turret extensions ZTA fo

18 VELUX

VELUX 19

2 VELUXENGLISH:Read installation instructions carefully before proceeding. VELUX rigid sun tunnels TGR and TMR are designed for roof pitches 14°-60°

USA: VELUX America Inc. 1-800-88-VELUXCDN: VELUX Canada Inc. 1 800 88-VELUX (888-3589)www.velux.comINSTALLATION INSTRUCTIONS FOR RIGID SUN TUNNEL TG

VELUX 3265157986342ENGLISH:Contents of packaging: 1. Dome2. Flashing3. Top collar with pivot ring4. Upper elbow5. Rigid tunnel section (additio

4 VELUXABC14°- 45°15°-90°45°-60°15°-90°TMRTGRENGLISH:A Decide location of the sun tunnel and mark the location with a wire so that it can be seen f

VELUX 5010: 10¾" (275 mm) 014: 14¾" (375 mm)12ENGLISH: Carefully remove the other parts from the ceiling ring. Rotate trim ring to disenga

6 VELUXENGLISH: Tip the plastic pins down into hidden position A. Insert the ceiling ring. Avoid distortion of the ceiling ring causing the diffuser

VELUX 745Sun tunnel Túnel solar Tunnel de lumièreWidth dimension Dimensiones de ancho Largeur de l'ouverture10"12½" (318 mm)14"1

8 VELUX6ENGLISH: Center the flashing over the rough opening and secure the flange with ten of the provided 1½" (40 mm) screws in all the pre-pu

VELUX 9ENGLISH: Overlap the top of the flange with underlayment to allow for proper drainage.ESPAÑOL: Cubra la parte superior de la brida con lámina